全国咨询热线:

13602788589


 欢迎进入广州市蓝垟机械有限公司!

蓝坪动态

NEWS

联系我们

Contact us

联系人:娄   总

手   机:13602788589

电   话:+86-20-84212561/84286878

新闻中心

Nanyang created 20 dry powder materials 3 minutes of uniform technology
专栏:Company news
发布日期:2018-06-20
阅读量:444
收藏:
(all sizes, specifications and capacity can be customized, price please contact the seller!)(we are the manufacturer, when contacting, please say to see the information on the official website, you ca...

1529465894089029630.jpg

(all sizes, specifications and capacity can be customized, price please contact the seller!)

(we are the manufacturer, when contacting, please say to see the information on the official website, you can give a certain discount!)

The factory production of trough type mixing machine, the agency is exquisite, beautiful shape, applicable to the pharmaceutical, cosmetic, food, chemical industry, dye, pesticide, metallurgy, ceramics and other industries of powder or granular materials of stirring and mixing, and do not produce in the process of mixing material, volatile, or the dissolution of metamorphism.

The tank body is made of stainless steel tank with internal and external polishing for easy cleaning. Mixing screw rotation, two to the material to the middle, outer propeller to both sides, two-way spiral mixing blade and propeller, the combination of both materials in continuous operation within the tank, mixing process of whole sealing without leakage.

We dare to promise!

100L granulated dry powder, 20 types of materials within 5 minutes even!

Ii. Parameters:

Type no.

100型

200型

300型

500型

1000型

Volume of tank

100L

200L

300L

500L

1000L

Production capacity

50L/次

100L/次

150L/次

250L/次

500L/次

Mixing time

3-10分/次

3-10分/次

3-10分/次

3-10分/次

5-15分/次

Stir the revolution

32转/分

32转/分

32转/分

32转/分

32转/分

The motor power

1.1KW

1.5KW

3KW

5.5KW

7.5KW

Iii. Structure description

1, stirring speed reducer: this reducer series for the main drive mechanism of mixing machine, is located on the right side of the unit, when working by stand inside the motor by chain drive worm and worm gear, to behold the speed ratio drives the stirring shaft, stirring shaft end sealing device, will open back cap when cleaning.

2. Mixing tank: the tank is made of stainless steel and is equipped with mixing slurry. It lies across the mixing decelerator and the feeding reducer.

3, pour material reducer: pour material reducer to control the orientation Angle of mixing tank, is located on the left side of the unit, when working from within the frame of a motor to drive through the chain belt worm, worm gear drive the mixing tank in a certain range measurements, make the material out at a time.

Iv. Instructions of use and matters needing attention

1, should be done before using an idle running test, test observation of the various components plant operation is normal, whether to have special noise, whether elevated temperature reducer, such as the situation is normal, just can put into production.

2. Remove the mixing mortar: when disassembling and stirring, remove both ends and tighten the nut, and then pull out the mixing mortar smoothly. The mixing slurry should be installed and removed with attention to stability, not hard to break the pry, so as to avoid bending deformation.

3. If it is necessary to shovel and scrape the material of groove wall during operation, the tool should be used.

4. If abnormal vibration or abnormal noises are found in the machine during use, stop and check immediately.

5. The service load shall not be too large, and the working current of the stirring motor shall be 6.8 amperes as normal.

V. lubrication of machine parts

The gear reducer is lubricated by oil immersion. Before driving, the oil of # 30 must be injected into the left and right speed reducer. Its oil quantity is half of the oil mark. To keep the oil clean, replace it every six months.

Vi. Maintenance instructions

1. Regularly check the machine parts, once or twice a month, check whether worm wheel, worm, bearing, shaft seal and other movable parts are working normally, and timely repair the defects if found.

2, once after use or shutdown, should remove residual material, clear in all parts, materials such as stop using for a long time, wipe and clean, all the machine parts of smooth surface coated with anti-rust oil, cloth canopy hood.

Vii. Installation instructions

This machine is packed in the whole set. After unpacking, it should be placed in a proper place. It can be used after the cushion is flat.

Viii. Electrical instructions

The machine power supply of 380 v alternating current (ac), stirring time due to the manual and automatic control, users should rotate button when using self-control in the automatic control, and the mixing time required to set, which USES manual will rotate button in the hand. If the transmission parts are damaged, regular inspection is required to ensure reliable operation.

We dare to promise!

100L granulated dry powder, 20 types of materials within 5 minutes even!

The discharge can be dumped out, and the discharge port can be customized according to the size of bag. The liquid nozzle can be installed on the top, and other requirements can be customized as required.

The factory production of trough type mixing machine, the agency is exquisite, beautiful shape, applicable to the pharmaceutical, cosmetic, food, chemical industry, dye, pesticide, metallurgy, ceramics and other industries of powder or granular materials of stirring and mixing, and do not produce in the process of mixing material, volatile, or the dissolution of metamorphism.

The tank body is made of stainless steel tank with internal and external polishing for easy cleaning. Mixing screw rotation, two to the material to the middle, outer propeller to both sides, two-way spiral mixing blade and propeller, the combination of both materials in continuous operation within the tank, mixing process of whole sealing without leakage.

上一页:Turk introduced the latest ultrasonic sensor
下一页:In 2013, orders of plastic extruder enterprises rebounded